The Federal Signal UltraVoice Indoor Controller, model UVIC, is designed to deliver clean, clear, amplified audio to a network of speakers (sold separately), configured for indoor notification or evacuation. The UltraVoice Indoor Controller has been designed for high quality reproduction of live or pre–recorded voice and tone, providing the ability to automate testing and emergencies.

The UVIC is housed in a single Type 1 style cabinet, with provisions for up to two 400–Watt amplifiers (sold separately). Each controller requires 120VAC and contains two sealed lead–acid batteries, providing over 30 minutes of operation in the event power has been lost.

The UVIC may be either Landline activated or Radio controlled from a remote location. Landline activation can initiate one of the eight onboard functions by connecting a momentary dry contact closure (customer supplied) to the appropriate PC board mounted terminal block. These functions can contain a combination of tone and pre–recorded voice or Public Address. Public Address is available from the supplied microphone located inside the controller. If radio–control of the UVIC is desired, an optional Federal Signal encoder model SS2000D and base station radio (approved radio license required at time of order) must be added to the control package and is typically located where administrative control and activation resides. In either configuration, each function will remain active for 3 minutes as standard.

The UVIC controller is also compatible with our Federal Commander Windows based digital status monitoring and activation software to "point and click" activation and local indication of alarms or fault conditions. Available functions to be displayed on a computer screen or captured to a database or printer are: AC Power, Battery Voltage, Charger Operation, Activation Current, Amplifier Status, Quiet Test, Intrusion and Local Activation.

OPTIONS

Ultravoice units may be equipped with a programmable RF receiver for remote control using MSK or DTMF protocols. Federal Commander Windows based software provides command and control for UltraVoice two–way products.