SF-1011P SelectFone Multi-Party Intercom and Paging System
Voltage
105-130VAC 50/60Hz
24VDC
Mount
Panel
Operating Current
33VA at 120VAC
28 Watts at 24VDC
System Standby Current
10VA at 120vAC
3 Watts at 24VDC
Enclosure Rating
Type 1
Remote Speaker Amplifier Output
BTL, Push-pull, Class B, 12 Watts Maximum into 8 Or 16 Ohm Load
Remote Speaker Amplifier Voltage Gain
31dB Adjustable
Remote Speaker Amplifier Frequency Response
250 - 12000Hz
Remote Speaker Amplifier Distortion
Less than 1% THD at 12 Watts, 1000Hz
Remote Speaker Amplifier Input Impedance
50,000 Ohms Nominal
Remote Speaker Amplifier Output Impedance
8 or 16 Ohms
Remote Speaker Amplifier Control
Adjustable Speaker Volume
Handset Microphone
10 Watt Noise Cancelling Dynamic Mic
Handset Receiver
170 +/-30 Ohms High Efficiency Dynamic Receiver
Handset Cable
6 Conductor Coil Cord, 10 Ft. Extended
Handset Output Level
1.5VRMS Nominal into 33 Ohm Load
Handset Voltage Gain
68dB Adjustable
Handset Frequency Response
250 - 6500 Hz (above) Hz +/- 1.5dB
Handset Distortion
1% THD Maximum at 1000Hz
Handset Control
Microphone Gain, Adjustable Receiver Volume
Height, Subset
9.5 IN
Width, Subset
7.859 IN
Depth, Subset
4.375 IN
Height, Intercom
3.75 IN
Width, Intercom
6.5 IN
Depth, Intercom
6 IN
Federal Signal Distributed by Gross Automation / Brookfield, WI / (877) 268-3700
Description
Parts
Agency
Diagrams
Specs
Ordering Info
